Free freight class calculator

Calculate LTL freight density, see its conditional class estimate, and follow the steps to verify the correct classification.

Free to use · No account needed · Clear calculation basis

Reference: standard 13-subprovision density scale for US less-than-truckload freight.

Your handling units

Use a separate group for different packed dimensions, weights or commodities.

Group 1

Measure and weigh the finished handling unit including its base, wrap and protection.

Check scale applicability

Check the applicable NMFC item and provisions before using a class. If you do not know whether the item uses this scale, calculate density only.

Open NMFTA ClassIT+
Load a worked example

Density-based class estimate

Class 100

NMFC item not verified

Use these estimates only when the current NMFC item uses this scale. Review handling, stowability, liability, packaging and carrier terms.

PALLET-A · 2 identical units

48 × 40 × 45 in = 50 ft³ / unit.

450 lb ÷ 50 ft³ = 9 lb/ft³

6 to less than 8 lb/ft³
Class 125
8 to less than 10 lb/ft³
Matched · Class 100
10 to less than 12 lb/ft³
Class 92.5
Combined gross weight
900 lb
Combined packed volume
100 ft³

2 handling units. Quantity scales weight and cube together. Each group keeps its own estimate.

Export density & class estimate

density & class estimate

Combined totals

Handling units
2
Gross (lb)
900
Volume (ft³)
100
Reference
NMFC standard 13-subprovision density scale, effective July 19, 2025
Applicability
NMFC item not verified. Apply class only if your item uses this scale.

PALLET-A

Identical quantity
2
Entered length (in)
48
Entered width (in)
40
Entered height (in)
45
Gross weight per unit (lb)
450
Gross pounds per unit
450
Volume per unit (ft³)
50
Density (lb/ft³)
9
Conditional class
100

The reference uses unrounded density and applies no automatic dimension rounding. Verify the NMFC item and carrier terms before rating or shipping.

Measure first. Then check the class.

  1. Measure the finished unit

    Use the greatest outer length, width and height, including any pallet, crate, wrap or projection.

  2. Weigh the whole handling unit

    Quantity repeats identical units. Add a group when dimensions, gross weight or commodity differ.

  3. Inspect density and the band

    Divide gross pounds by packed cubic feet. Use the unrounded density to choose the class interval where the reference scale applies.

  4. Verify the applicable provisions

    Find the current NMFC item and subprovision. Review the item, packaging, notes and carrier agreement before using a class.

Measure the outside envelope

Measure to the furthest projection on each axis. The 45 in height in this example includes the pallet base.

Top view · 48 × 40 in
Side view · 48 × 45 in

Worked examples

9 lb/ft³ · conditional Class 100

A 48 × 40 × 45 in pallet occupies 50 ft³. At 450 lb gross, density is 9 lb/ft³. Two identical pallets total 900 lb and 100 ft³, with the same density per pallet.

Metric equivalent · same density

A 121.92 × 101.6 × 114.3 cm handling unit weighing 204.1165665 kg converts to the same 50 ft³ and 450 lb. Density is 9 lb/ft³.

Two groups · separate estimates

Keep the two 450 lb pallets and add one 48 × 40 × 36 in pallet at 800 lb. The added pallet is 20 lb/ft³ and conditionally Class 70. The combined shipment is 1,700 lb and 140 ft³. Retain the estimate for each group.

Exact boundary · Class 92.5

A 50 ft³ pallet at 500 lb is exactly 10 lb/ft³, the inclusive lower bound. At 499.995 lb the same pallet is 9.9999 lb/ft³, in the Class 100 band.

Light unit · conditional Class 400

A 48 × 40 × 72 in unit is 80 ft³. At 60 lb gross the density is 0.75 lb/ft³.

The 13-subprovision density reference

The standard scale took effect July 19, 2025. Use the chart when the current NMFC item calls for this scale. The lower bound of each band is included.

SubprovisionDensity (lb/ft³)Conditional class
1Less than 1400
21 to less than 2300
32 to less than 4250
44 to less than 6175
56 to less than 8125
68 to less than 10100
710 to less than 1292.5
812 to less than 1585
915 to less than 22.570
1022.5 to less than 3065
1130 to less than 3560
1235 to less than 5055
1350 or greater50

Freight density formula

For inches, divide the product of the three dimensions by 1,728 to get ft³. For centimeters, divide by 28,316.846592. Divide kg by 0.45359237 to get pounds. Density is gross pounds divided by cubic feet.

What else determines classification?

Density describes how much weight occupies the available cube. Handling difficulty, stowability alongside other freight and liability for damage or other risk also matter. Review the applicable classification and carrier terms.

Freight class questions, answered

What is freight class?

Freight class is an LTL classification used in rating. Check the applicable NMFC item and its provisions for your freight.

How is LTL density calculated?

Divide the gross pounds of one packed handling unit by its cubic feet. Include packaging in both the dimensions and gross weight.

Does a density estimate identify my NMFC item?

Use the commodity, packaging and current classification provisions to find the governing item. The calculator uses your measurements to estimate density and, conditionally, a class.

Should I average different freight classes?

Keep each handling-unit group’s estimate. Check the governing item and the carrier’s rules for what must be shown on shipment paperwork.

What happens at an exact boundary?

The next band starts at its listed lower bound. For example, 10 lb/ft³ enters Class 92.5 when the reference scale applies.

Can I use metric measurements?

Yes. Choose centimeters and kilograms. The calculator converts to pounds and cubic feet before showing the density.

Should I include the pallet and wrap?

Yes. Measure and weigh the finished handling unit at its greatest packed dimensions.

What if the item uses a different scale?

Choose density only and check the item’s provisions and carrier terms for the correct class.

Sources

Related calculators