Measure each packed unit
Enter outer length, width and height, quantity and gross weight. Include packaging, bulges and overhang. For palletized cargo, check the pallet-base fields so the base height is added once.
Plan cartons and pallets for road or ocean. Inspect the load in 360°, play the loading sequence and see how weight is distributed.
Free to use · No account required · Your calculation stays in this browserEnter outer length, width and height, quantity and gross weight. Include packaging, bulges and overhang. For palletized cargo, check the pallet-base fields so the base height is added once.
Choose loose or palletized cargo, permitted rotation, stackability and maximum stack height. Add floor-only or maximum supported-weight restrictions in Equipment & assignments when required.
Select ocean or road freight. Turn the result through 360°, follow the centerline and inspect side weights, Center of gravity and occupied length. Use Playback to display the loading sequence.
Resolve unplaced cargo, check the actual equipment and export the manifest or placement details. Confirm vehicle-specific limits and securement before booking.
Select a shipment in the calculator. Change the cargo or equipment to compare the new arrangement.
Load four half-height drink pallets, six dry-goods pallets, twelve roll cages and forty bag-in-box cartons in a measured 13.60 m usable trailer envelope.
Choose Store delivery. Run Playback, then check the centerline and weights.
Eight 80 × 80 × 60 cm machinery crates at 100 kg each, plus sixteen 60 × 40 × 50 cm export cartons at 12 kg each.
The ocean example puts supported carton stacks between mirrored crate stacks. Cargo span measures the length of the load. Cargo position shows where it sits in the 20′ Standard container. Changing stack limits can change the floor space required without changing cargo volume.
Twenty-six upright, non-stackable GMA pallets, each 121.92 × 101.6 × 160 cm and 600 kg gross.
The example selects the 53 ft dry-van planning profile. Inspect the placed pallets and both side weights, then review the actual usable dimensions and vehicle-specific limits.
A unit must pass through the loading opening and fit inside. Ocean presets include door dimensions. Road door checks require supplied measurements.
Each stack has complete base support. Non-stackable and floor-only cargo stay on the deck. A stated stack height does not establish packaging strength; enter supported-weight limits when known.
The arrangement uses gross handling-unit weights and centered rows. The viewer displays longitudinal and lateral Center of gravity; a centered cargo layout alone does not establish acceptable axle loads.
The capacity comparison and the physical arrangement answer different questions. The conservative row planner may use more vehicles than the capacity estimate. Review the discrepancy and all unplaced cargo before booking.
These are the exact presets used by Stowbase. Actual containers vary by fleet and manufacturer; confirm the unit supplied for your shipment.
| Equipment | Internal L × W × H | Door W × H | Internal volume | Preset payload |
|---|---|---|---|---|
| 20' Standard (20GP) | 5.898 × 2.352 × 2.393 m | 2.34 × 2.280 m | 33.20 m³ | 28,180 kg |
| 40' Standard (40GP) | 12.032 × 2.352 × 2.393 m | 2.34 × 2.280 m | 67.72 m³ | 26,680 kg |
| 40' High Cube (40HQ) | 12.032 × 2.350 × 2.698 m | 2.34 × 2.585 m | 76.29 m³ | 28,600 kg |
| 45' High Cube (45HQ) | 13.556 × 2.352 × 2.698 m | 2.34 × 2.585 m | 86.02 m³ | 27,600 kg |
Road profiles compare pallet positions, payload and height. Their nominal planning envelopes can be replaced with actual usable length, width, height and door dimensions in the tool. Equipment payload is separate from gross vehicle weight and axle limits.
There is no universal carton count. Packed dimensions, gross weight, permitted orientation, stack height, door clearance and available floor space determine the arrangement. Enter each cargo line separately and inspect its actual placements. A volume estimate alone cannot show whether the remaining space is usable.
For centimeter measurements, multiply length × width × height and divide by 1,000,000. Multiply by quantity, repeat for every cargo line and add the results. A 60 × 40 × 50 cm carton occupies 0.12 m³; 100 cartons occupy 12.00 m³ before handling allowances.
Yes. Enter the packed handling-unit dimensions and gross weight. Road mode also estimates pallet positions, service level and equipment capacity. Loose cartons are consolidated onto standard pallets by default. Mark roll cages or other individual handling units in Equipment & assignments. Review the physical arrangement separately, and replace nominal vehicle dimensions with the actual usable dimensions when available.
The Full trailer example places 26 upright 48 × 40 in pallets, each 600 kg gross, on the floor of one nominal 53 ft dry van. The result depends on actual usable dimensions, pallet footprints, orientation, stackability and weight. Enter the equipment and cargo you intend to use.
Stowbase measures occupied length from the deepest end of the vehicle to the last placed cargo. A loading metre (LDM) generally describes one metre of deck length across the full width. The Feet and Meters buttons change the viewer units. Ask the carrier how it calculates billable space for part loads.
The vehicle count bound is the minimum implied by payload, usable volume and required floor area for one equipment type before manual assignments. The length bound applies to the cargo on the selected vehicle and uses volume, required floor area and allowable orientations. A complete plan that meets a bound reaches the minimum for that measure under the modeled inputs. Actual axle loads, floor ratings and securement still require review.
Volume utilization is cargo volume divided by the internal equipment volume. Occupied loading length is the distance from the deepest end to the end of the arranged cargo. Non-stackable freight and separated gaps can consume loading length while leaving unused volume above or between units.
The viewer shows the equipment centerline, gross cargo weight on each side and the Center of gravity. These values are calculated from the placed units and update as cargo settles during playback. Mass is assumed uniformly distributed within each handling-unit footprint. Vehicle tare, axle loads, floor ratings and securement still require review.
Yes. Drag the load for a full 360° view, tilt it or zoom in. Front, Side and Top views are also available. Playback is optional, and camera controls remain available during and after loading.
Use the CSV or Excel template to prepare multiple cargo lines. Review file units, rejected rows and import options before applying the file. Export the manifest, calculated load plan or individual cargo placements. Placement exports include vehicle assignments, dimensions, gross weights and distribution figures.
No. It estimates capacity and produces a conservative physical arrangement. A matched lower bound applies to the modeled cargo and equipment. Freight rates, packaging strength and transport readiness require separate review. Confirm actual equipment, route restrictions, axle distribution, handling access and securement with the responsible operator and carrier.
Cargo volumes and weights come from the entered packed units. Ocean capacity estimates use the selected equipment, operational profile and planning allowance. Road capacity estimates use pallet positions, height and payload; loose cartons are consolidated onto standard pallets unless marked as individual handling units.
The physical planner arranges supported, equal-stack rows centered across the equipment width and loads the deepest available row before advancing toward the door. It uses gross weights to prioritize rows and respect payload and supplied top-load limits. The planner compares the completed arrangement with independent lower bounds for vehicle count and occupied length.
Distribution figures assume each unit’s gross mass is uniformly distributed within its footprint. Units crossing the centerline contribute proportionally to both sides. Center of gravity is weighted by each unit’s gross mass and position. During playback, figures include only units that have settled.
Actual axle loads, equipment tare, floor ratings, packaging-strength evidence, route restrictions, blocking, bracing and securement require operator and carrier review. Stowbase does not infer an unprovided limit or mark an unverified check as passed.
Methodology reviewed 17 November 2026. Equipment references and packing guidance: