Cartons and crates · 5.400 m³
Twenty 60 × 40 × 50 cm cartons contribute 2.4 m³. Five 100 × 80 × 75 cm crates contribute 3.0 m³. Total: 25 packed units, 5.400 m³, 190.70 ft³ or 5,400 L.
Calculate cubic meters for cartons, crates and pallets. Add each packed size and quantity, see the combined volume, and convert the result to cubic feet.
Free to use · No account needed · Mixed input units
Result units change the display. Each cargo line keeps its own dimension unit.
Use one line per packed size. Quantity is the number of identical units.
5.400 m³
190.70 ft³ · 5,400 L
0.12 m³ per unit × 20 · 44.44% of total packed volume
0.6 m³ per unit × 5 · 55.56% of total packed volume
CARTON-A · 60 × 40 × 50 cm
Each view shows one packed unit at its own scale.
Count each finished handling unit once. Totals use unrounded line volumes.
Use the greatest outer length, width and height, including the crate, pallet and any protection that ships with it.
Enter identical units on one line. Add another line when the packed dimensions differ. Each line can use its own dimension unit.
Review each line’s share of the shipment. Switch between cubic meters and cubic feet without changing the cargo.
Export the current lines or print a volume summary with the input dimensions and the calculated volume.
Twenty 60 × 40 × 50 cm cartons contribute 2.4 m³. Five 100 × 80 × 75 cm crates contribute 3.0 m³. Total: 25 packed units, 5.400 m³, 190.70 ft³ or 5,400 L.
Keep the 20 metric cartons and enter five 40 × 32 × 30 in crates. Those crates contribute 3.146316288 m³. Combined volume is 5.546316288 m³, about 195.87 ft³.
A finished 120 × 100 × 150 cm pallet occupies 1.8 m³. Two identical pallets occupy 3.6 m³, about 127.13 ft³. Count the finished units once.
A 2 cm cube is 8 cm³, equivalent to 0.000008 m³ or 0.008 L. Extra decimal places help distinguish small positive volumes from zero.
Convert the dimensions to meters or use the cubic factor below. Multiply each unit’s volume by quantity, then add the line totals.
| Input unit | CBM per packed unit |
|---|---|
| mm | L × W × H ÷ 1,000,000,000 |
| cm | L × W × H ÷ 1,000,000 |
| m | L × W × H |
| in | L × W × H × 0.000016387064 |
| ft | L × W × H × 0.028316846592 |
Divide cubic meters by 0.028316846592 to get cubic feet. Multiply by 1,000 to get liters. Add unrounded line volumes before formatting the total.
Measure the unit in the configuration the carrier receives. Do not add the volume of the loose cartons again if the finished pallet already includes them.
CBM means cubic meters, a measure of three-dimensional packed volume. One cubic meter is a cube measuring 1 m on each side.
Choose one unit for the three dimensions on each line. Different lines can use millimeters, centimeters, meters, inches or feet.
Multiply the three centimeter dimensions, divide by 1,000,000 and multiply by the quantity of identical pieces.
One cubic meter is approximately 35.31467 cubic feet.
Use the outer dimensions of the handling unit as tendered. For a finished pallet, include the base and any projections.
A carrier can use volume as one input to a chargeable-weight rule. Get the divisor, comparison basis and rounding rules for your service.
Review the individual dimensions, payload, placement and handling limits to check physical fit.
Use sku, quantity, length, width, height and dimension_unit. Review any rejected records before replacing the current cargo with valid entries.