DIM controls · 72 kg
At 5,000 cm³/kg, a 60 × 40 × 50 cm package is 24 kg DIM. Three packages weighing 12 kg each give a 72 kg estimate with per-package comparison and no rounding.
Compare actual and volumetric weight, see which controls the estimate, and understand how the divisor and rounding change the result.
Free to use · No account needed · Explicit calculation rules
Compare each package · cm / kg · confirm the rules in your service agreement.
Enter the outer dimensions and actual gross weight of one packed unit per line.
Dimensions used: 60 × 40 × 50 cm
A new unit pair converts your cargo and loads an illustrative divisor for that pair. Re-enter your service’s rounding increments.
Enter 0 for no rounding.
72 kg
3 packages · compare each package
Dimensional weight controls this comparison.
60 × 40 × 50 cm → 120,000 cm³ ÷ 5000 = 24 kg DIM before weight rounding.
Higher compared weight: 24 kg × 3 = 72 kg.
5000 cm³/kg · dimension increment 0 cm · actual increment 0 kg · DIM increment 0 kg · compare each package. Zero means no rounding.
Check carrier minimum weights, special packaging, service eligibility and accessorial charges separately.
Enter the greatest outside dimensions and actual scale weight, including packaging. Use different lines for different packed sizes or weights.
Choose a unit-paired divisor: cm³/kg or in³/lb. Check the specific service and rate agreement for the divisor and rounding increments.
Apply dimension rounding first, then multiply and divide. Round actual and DIM weight separately as required and compare the resulting values.
Compare package by package or at shipment level. Confirm any minimums, special packaging rules and charges separately.
At 5,000 cm³/kg, a 60 × 40 × 50 cm package is 24 kg DIM. Three packages weighing 12 kg each give a 72 kg estimate with per-package comparison and no rounding.
Keep the same dimensions and increase actual weight to 30 kg per package. Three comparisons give 90 kg.
Add two 40 × 30 × 20 cm packages at 7 kg each. Per package, 3 × max(12, 24) + 2 × max(7, 4.8) = 86 kg. By shipment, max(50, 81.6) = 81.6 kg.
For a 139 in³/lb illustration, round 20.2 × 15.1 × 10.1 in up to 21 × 16 × 11 in. Then 3,696 ÷ 139 gives about 26.589928 lb DIM. Round DIM and actual 12.2 lb up to 27 lb and 13 lb respectively. Two packages give 54 lb.
The table lists reference divisors to check against your service. Confirm geography, effective dates, rounding and how the carrier applies the comparison.
| Reference | Divisor | Unit basis |
|---|---|---|
| DHL Express metric illustration | 5,000 | cm³/kg |
| Air freight illustration | 6,000 | cm³/kg |
| US parcel reference | 139 | in³/lb |
| UPS Retail reference | 166 | in³/lb |
Actual is the packed scale weight. DIM is volume divided by the selected unit-specific factor. Estimated chargeable weight uses the higher compared weight at the agreed basis.
After dimension rounding, add the raw actual weights and raw DIM weights separately. Apply weight rounding to the two totals before taking the higher one.
Set the divisor and separate dimension, actual weight and DIM weight increments. Use zero for an increment when that measurement stays unrounded.
Multiply the three dimensions after any required dimension rounding. Divide by the unit-paired divisor, then apply the service’s DIM-weight rounding rule.
Actual weight comes from a scale. DIM puts outer package volume on a weight basis for rating.
Both may appear in metric examples. Use the divisor your carrier agreement specifies for the shipment and service.
Both are expressed in in³/lb. A smaller divisor produces a higher DIM weight for the same package dimensions.
Rounding dimensions before multiplication changes the volume. The weight inputs may have different rounding increments or timing.
Choose whole shipment where your service uses it. Comparing each package separately can give a different result.
Measure the package or handling unit the service uses for rating, including base and protection where applicable.
Use the weight with the actual tariff or rate agreement. Minimums, special packaging and accessorial charges may affect the quote.